Inmar Professional Aluminum Series | 530-SR-HD

Inmar Professional Aluminum Series | 530-SR-HD

SKU#
530-SR-HD
$4,995.00
$4,895.00
(You save $100.00 )
Shipping:
LTL (Freight Truck)
Model:
530-SR-HD
Type:
Roll Up
Floor:
Aluminum Sectional
Length:
17'5"
Beam:
6'8"
Dry Weight:
385 lbs
Capacity:
12 persons
Max Motor:
60hp Long Shaft
Material:
PVC
Series:
Search & Rescue
Subtotal:
$4,995.00
$4,895.00
(You save $100.00 )
Available Options
Adding to cart… The item has been added
Rates are for quote purposes only and may not reflect actual shipping costs. Real-time rates will be provided at check-out. For shipping outside the US or a personalized quote, please call 805-644-6290. Shipping Terms
  • Description

    Boat Specifications

    • LOA: 17'5"
    • Beam: 6'8"
    • Weight: 385 lbs (Boat Only)
    • Capacity: 12 persons or 2,985 lbs
    • Max Motor: 60hp Long
    • Tube Diameter: 22"
    • Air Chambers: 5 + Keel
    • Fabric Type: Mehler (PVC)
    • Factory Warranty: 3 years (2 Year Commercial)

    Standard Features

    Aluminum floor with anodized aluminum stringers, inflation & over inflation valves (one for each air chamber), 10 carry handles (8 in SR model), 2 seats/4 positions (2 seat/2 position in SR model), 15 interior tie down D-rings (11 on SR model), non-skid traction pad on aluminum floor panels, (dive patch on the SR model), interior/exterior lifelines, reinforcement on tube transom attachments, interior transom lifting rings, transom eyes, 2 large D-rings on rear tubes, interior aluminum engine mounting plate, marine plywood transom, self-bailer with plug (pop-up design), all-around rub strake, bow handle, 2 large towing rings on bow, keel guard, 2 repair kits, 2 foot pumps, bow bag, 2 oars

     

Boat Specifications

  • LOA: 17'5"
  • Beam: 6'8"
  • Weight: 385 lbs (Boat Only)
  • Capacity: 12 persons or 2,985 lbs
  • Max Motor: 60hp Long
  • Tube Diameter: 22"
  • Air Chambers: 5 + Keel
  • Fabric Type: Mehler (PVC)
  • Factory Warranty: 3 years (2 Year Commercial)

Standard Features

Aluminum floor with anodized aluminum stringers, inflation & over inflation valves (one for each air chamber), 10 carry handles (8 in SR model), 2 seats/4 positions (2 seat/2 position in SR model), 15 interior tie down D-rings (11 on SR model), non-skid traction pad on aluminum floor panels, (dive patch on the SR model), interior/exterior lifelines, reinforcement on tube transom attachments, interior transom lifting rings, transom eyes, 2 large D-rings on rear tubes, interior aluminum engine mounting plate, marine plywood transom, self-bailer with plug (pop-up design), all-around rub strake, bow handle, 2 large towing rings on bow, keel guard, 2 repair kits, 2 foot pumps, bow bag, 2 oars

 

Additional Prep/DMV Info

Dealer Engine Prep

Dealer Engine Prep is required to validate the warranty and ensure a working engine. Prep includes completing a full Original Equipment Manufacturer (OEM) checklist, test-run performed in a tank for quality assurance, and re-crating for shipment. Outboards picked up in-store may be stand-alone and no longer in the box or crate.

Pre-Delivery Inspection

Pre-delivery Inspection is required to validate the warranty and includes the necessary services & products used on each new vessel to ensure quality performance prior to delivery.

For rigged vessels: Boat Specialists will install a deep cycle marine battery, rig all steering components, and complete an electrical and systems check. A full system check includes filling the motor with oil, fluids, and fuel, then a test run performed in a tank for quality assurance.

Once everything is tuned and prepared, a sea trial is performed to achieve the ideal RPM-to-top-speed ratio, ensuring the boat gets on plane properly and all systems operate on water. Afterward, full detail is performed on the exterior, deck, and hull to be turn-key ready for the customer.

DMV Registration On Boats and Trailers - For California Residents Only

Boat Specialists will take care of your CA DMV registration including signing a Power of Attorney for each registration. We will mail temporary paperwork with the documents that require the customer's signature. The customer is to sign and return the documents in the envelope provided. Once we have received the paperwork, we will submit all required documents to the DMV to complete registration.

YOU MAY ALSO LIKE…