Achilles HB-350LX Inflatable Boat | HB350LX 2022 | 00179

Achilles HB-350LX rigid hull inflatable boat with oars.

SKU#
ACH00179E222
$5,210.00
$3,888.00
(You save $1,322.00 )
Shipping:
Local Pick-up Only - Ventura
Model:
HB-350LX
Type:
RIB
Floor:
Fiberglass Hull
Length:
11'6"
Beam:
5'9"
Dry Weight:
161 lbs
Capacity:
6 persons
Max Motor:
20hp Short Shaft
Material:
Hypalon
Promotions:
Non-Current
Subtotal:
$5,210.00
$3,888.00
(You save $1,322.00 )
Available Options
Adding to cart… The item has been added
Rates are for quote purposes only and may not reflect actual shipping costs. Real-time rates will be provided at check-out. For shipping outside the US or a personalized quote, please call 805-644-6290. Shipping Terms
  • Description
    This Achilles HB-350LX unit is a Showroom Display model at our Ventura, CA Dealership and has Danard Launch Wheels installed.
     
    The Achilles HB-LX boats provide the critically acclaimed performance of the Achilles DX deep "V" fiberglass hull design in a lighter RIB. They also have the same tube design as the DX series, yet a modification of the deck design and removing the bow locker results in a RIB that is on average 20% lighter than the same size DX model. This means they can perform well with smaller engines and can be carried or transported more easily. Despite their lighter weight and lower cost compared to the HB-DX series, they are still loaded with all the high quality standard features for which Achilles is known.
     
    The Achilles HB-350LX inflatable boat is the largest of the LX lightweight RIB series. The expansive interior allows for plenty of deck space for gear, dive tanks, and more people. A deep “V”, hypalon fabric, and quality accessories are standard. The tender should plane up to 4 persons with a 20 horsepower outboard on the transom and is capable of hauling 6 persons or 1,680 pounds.
     
    Included Equipment
      • Oars
      • Oar locks
      • Seat
      • Launch wheels
      • Pump
      • Patch kit
    Standard Features
      • Pearl Gray Achilles CSM reinforced fabric
      • Four-layer seam construction
      • Deep "V" fiberglass hull
      • Full-length teardrop rubbing strake
      • D-rings for towing bridle
      • Stainless bow eye
      • Lifting hardware for davits
      • Webbed passenger, helmsman, and rear carry handles
      • Bow carry handle
      • Interior oar straps
      • Gas tank tie down hardware
      • Protective transom motor clamp plate
      • Extra seat attachment patches
      • Bailer valve
      • Owner's manual 
  • SPECIFICATIONS
    Boat Specifications
      • Overall Length: 11'6"
      • Overall Beam: 5'9"
      • Inside Length: 8'8"
      • Inside Beam: 2'9"
      • Weight: 161 lbs
      • Capacity: 6 persons or 1,680 lbs
      • Max Motor: 20hp Short Shaft
      • Rec Motor: 15hp Short Shaft
      • Max Motor Weight: 121 lbs
      • Tube Diameter: 18"
      • Air Chambers: 3
      • Fabric Type: Hypalon
      • Warranty: Achilles 5-Year Warranty
      • Hull Dimensions: 10'10" x 3'7" x 1'8"
This Achilles HB-350LX unit is a Showroom Display model at our Ventura, CA Dealership and has Danard Launch Wheels installed.
 
The Achilles HB-LX boats provide the critically acclaimed performance of the Achilles DX deep "V" fiberglass hull design in a lighter RIB. They also have the same tube design as the DX series, yet a modification of the deck design and removing the bow locker results in a RIB that is on average 20% lighter than the same size DX model. This means they can perform well with smaller engines and can be carried or transported more easily. Despite their lighter weight and lower cost compared to the HB-DX series, they are still loaded with all the high quality standard features for which Achilles is known.
 
The Achilles HB-350LX inflatable boat is the largest of the LX lightweight RIB series. The expansive interior allows for plenty of deck space for gear, dive tanks, and more people. A deep “V”, hypalon fabric, and quality accessories are standard. The tender should plane up to 4 persons with a 20 horsepower outboard on the transom and is capable of hauling 6 persons or 1,680 pounds.
 
Included Equipment
    • Oars
    • Oar locks
    • Seat
    • Launch wheels
    • Pump
    • Patch kit
Standard Features
    • Pearl Gray Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Deep "V" fiberglass hull
    • Full-length teardrop rubbing strake
    • D-rings for towing bridle
    • Stainless bow eye
    • Lifting hardware for davits
    • Webbed passenger, helmsman, and rear carry handles
    • Bow carry handle
    • Interior oar straps
    • Gas tank tie down hardware
    • Protective transom motor clamp plate
    • Extra seat attachment patches
    • Bailer valve
    • Owner's manual 
Boat Specifications
    • Overall Length: 11'6"
    • Overall Beam: 5'9"
    • Inside Length: 8'8"
    • Inside Beam: 2'9"
    • Weight: 161 lbs
    • Capacity: 6 persons or 1,680 lbs
    • Max Motor: 20hp Short Shaft
    • Rec Motor: 15hp Short Shaft
    • Max Motor Weight: 121 lbs
    • Tube Diameter: 18"
    • Air Chambers: 3
    • Fabric Type: Hypalon
    • Warranty: Achilles 5-Year Warranty
    • Hull Dimensions: 10'10" x 3'7" x 1'8"

Additional Prep/DMV Info

Dealer Engine Prep

Dealer Engine Prep is required to validate the warranty and ensure a working engine. Prep includes completing a full Original Equipment Manufacturer (OEM) checklist, test-run performed in a tank for quality assurance, and re-crating for shipment. Outboards picked up in-store may be stand-alone and no longer in the box or crate.

Pre-Delivery Inspection

Pre-delivery Inspection is required to validate the warranty and includes the necessary services & products used on each new vessel to ensure quality performance prior to delivery.

For rigged vessels: Boat Specialists will install a deep cycle marine battery, rig all steering components, and complete an electrical and systems check. A full system check includes filling the motor with oil, fluids, and fuel, then a test run performed in a tank for quality assurance.

Once everything is tuned and prepared, a sea trial is performed to achieve the ideal RPM-to-top-speed ratio, ensuring the boat gets on plane properly and all systems operate on water. Afterward, full detail is performed on the exterior, deck, and hull to be turn-key ready for the customer.

DMV Registration On Boats and Trailers - For California Residents Only

Boat Specialists will take care of your CA DMV registration including signing a Power of Attorney for each registration. We will mail temporary paperwork with the documents that require the customer's signature. The customer is to sign and return the documents in the envelope provided. Once we have received the paperwork, we will submit all required documents to the DMV to complete registration.

YOU MAY ALSO LIKE…