-
Description
The AB Alumina series is the lightest and most durable center console tender available. Featuring an aluminum hull with a modular console design, these boats require less horsepower than their fiberglass siblings. The AB 9.5ALX is compact and weighs under 400 pounds once laden with an outboard. Davit lifting hardware is built into the boat along with a boarding step on the bow, which includes a compact cleat and navigation lights.
Standard Features/Equipment
-
- Deep "V" marine grade aluminum hull
- Stringer system welded under aluminum deck
- Heavy duty transom knees
- Non-skid rubber floor panels
- Plastic external transom plate
- Aluminum internal transom plate
- Aluminum bow eye
- 4 aluminum davit lifting points
- Aluminum transom tie down & towing rings
- Aluminum bow tie down & towing rings
- Deck drain with plug
- Orca five layer coated fabric
- Raised single rub rail
- Push push plastic non-corrosive 2 stage inflation valves
- 1 front & 2 side fabric handles on tubes
- 2 inside bow sets of double fabric handles on tubes
- 2 inside stern single fabric handles on tubes
- Closed cell foam upholstery
- Fiberglass console small
- Bench seat with storage
- Bow locker/seat with vent & storage to fit a 3 gallon portable fuel tank
- Bow hatch cushion
- Console access lid
- 360° white anchor light pole
- Stainless steel console grab rail
- Battery box
- Battery switch
- Fuel and water separator filter
- Mechanical steering system
- Stainless steel steering wheel
- Complete tin wiring & heat shrink sealed terminals
- 3 layers reinforced seams
- Rubber protector on full length of keel
- Hand pump
- Maintenance kit
- Owner's manual
Standard Rigging
Sidemount remote with harness and keyswitch, analog tachometer, analog trim gauge, mechanical control cables
Required Fees
00 Destination Fee - Fee charged by a manufacturer to ship product to dealerships.00 Pre-delivery Inspection - Fee requested by manufacturers for preparing & testing the vessel on & off the water for turn-key delivery. Validates warranties. -
-
SPECIFICATIONS
Boat Specifications
-
- Overall Length: 9'6"
- Overall Beam: 5'6"
- Interior Length: 6'11"
- Interior Beam: 2'6"
- Weight: 236 lbs (Boat Only)
- Capacity: 4 persons
- Max Motor: 25hp Long Shaft
- Rec Motor: 20hp Long Shaft
- Tube Diameter: 17"
- Air Chambers: 3
- Fuel Tank: 3 gallons (portable tank)
- Fabric Type: Hypalon
- Warranty: AB Inflatable 10-Year Warranty
Motor Options
-
- Horsepower: 20hp
- Cylinders: 2 cyl
- Shaft Length: 20" Long
- Steering: Remote Mechanical
- Starter: Electric + Manual
- Weight: 130 lbs
- Trim/Tilt: Power Tilt
- Alternator Output: 16 amp
- Degree of Tilt: 62°- 63°
- Degree of Trim: -3° through +16°
- Full Throttle Range: 5000 - 6000 rpm
- Displacement: 432cc
- Fuel Induction System: Electronic Fuel Injection (EFI)
- Warranty: Yamaha 3-Year Warranty
-
- Horsepower: 25hp
- Cylinders: 2 cyl
- Shaft Length: 20" Long
- Steering: Remote Mechanical
- Starter: Electric
- Weight: 141 lbs
- Trim/Tilt: Power Trim & Tilt
- Alternator Output: 16 amp
- Degree of Tilt: 62°- 63°
- Degree of Trim: -3° through +16°
- Full Throttle Range: 5000 - 6000 rpm
- Displacement: 432cc
- Fuel Induction System: Electronic Fuel Injection (EFI)
- Warranty: Yamaha 3-Year Warranty
-
Standard Features/Equipment
-
- Deep "V" marine grade aluminum hull
- Stringer system welded under aluminum deck
- Heavy duty transom knees
- Non-skid rubber floor panels
- Plastic external transom plate
- Aluminum internal transom plate
- Aluminum bow eye
- 4 aluminum davit lifting points
- Aluminum transom tie down & towing rings
- Aluminum bow tie down & towing rings
- Deck drain with plug
- Orca five layer coated fabric
- Raised single rub rail
- Push push plastic non-corrosive 2 stage inflation valves
- 1 front & 2 side fabric handles on tubes
- 2 inside bow sets of double fabric handles on tubes
- 2 inside stern single fabric handles on tubes
- Closed cell foam upholstery
- Fiberglass console small
- Bench seat with storage
- Bow locker/seat with vent & storage to fit a 3 gallon portable fuel tank
- Bow hatch cushion
- Console access lid
- 360° white anchor light pole
- Stainless steel console grab rail
- Battery box
- Battery switch
- Fuel and water separator filter
- Mechanical steering system
- Stainless steel steering wheel
- Complete tin wiring & heat shrink sealed terminals
- 3 layers reinforced seams
- Rubber protector on full length of keel
- Hand pump
- Maintenance kit
- Owner's manual
Standard Rigging
Sidemount remote with harness and keyswitch, analog tachometer, analog trim gauge, mechanical control cables
Required Fees
Boat Specifications
-
- Overall Length: 9'6"
- Overall Beam: 5'6"
- Interior Length: 6'11"
- Interior Beam: 2'6"
- Weight: 236 lbs (Boat Only)
- Capacity: 4 persons
- Max Motor: 25hp Long Shaft
- Rec Motor: 20hp Long Shaft
- Tube Diameter: 17"
- Air Chambers: 3
- Fuel Tank: 3 gallons (portable tank)
- Fabric Type: Hypalon
- Warranty: AB Inflatable 10-Year Warranty
Motor Options
-
- Horsepower: 20hp
- Cylinders: 2 cyl
- Shaft Length: 20" Long
- Steering: Remote Mechanical
- Starter: Electric + Manual
- Weight: 130 lbs
- Trim/Tilt: Power Tilt
- Alternator Output: 16 amp
- Degree of Tilt: 62°- 63°
- Degree of Trim: -3° through +16°
- Full Throttle Range: 5000 - 6000 rpm
- Displacement: 432cc
- Fuel Induction System: Electronic Fuel Injection (EFI)
- Warranty: Yamaha 3-Year Warranty
-
- Horsepower: 25hp
- Cylinders: 2 cyl
- Shaft Length: 20" Long
- Steering: Remote Mechanical
- Starter: Electric
- Weight: 141 lbs
- Trim/Tilt: Power Trim & Tilt
- Alternator Output: 16 amp
- Degree of Tilt: 62°- 63°
- Degree of Trim: -3° through +16°
- Full Throttle Range: 5000 - 6000 rpm
- Displacement: 432cc
- Fuel Induction System: Electronic Fuel Injection (EFI)
- Warranty: Yamaha 3-Year Warranty