-
Description
This pre-owned AB Inflatables Ventus 12VL package is a rare find—garage-kept, lightly used, and showing just 11 hours on the Yamaha 20hp motor. It’s in excellent condition and comes complete with a Marlon trailer, making it ready to roll straight to the water. If you’re after a tender that’s nimble, durable, and easy to haul, this setup is dialed in.
The Ventus is a lightweight, full-length fiberglass deep-V RIB built for extra space and performance. Its deeper freeboard and spacious interior deliver a stable, dry ride, while the efficient hull design means you get great maneuverability without needing much horsepower. Whether you're cruising back to the dock for lunch or heading out for a quick fishing trip, this boat packs serious versatility into a sleek, compact frame.
Safety and comfort come standard, with features like 820 CSM Orca® Coated Fabric for added protection, a non-skid deck for confident footing, and an extra air chamber built into the hull. It’s easy to haul onto a deck or beach, making shore excursions a breeze. All in all, this Ventus package is the kind of tender that turns everyday outings into mini adventures.
Standard Features/Equipment
-
- Hand Laid Fiberglass Deep "V" Hull
- Stringer System Laminated into Hull
- Non-Skid Rubber Floor Panels
- Plastic External Transom Plate
- Aluminum Internal Transom Plate with Security Lip
- Stainless Steel Bow Eye
- (3) Stainless Steel Davit Lifting Points
- Inner Hull Drain with Plug
- Deck Condensation Plug
- Orca (CSM) Five Layer Coated Fabric
- Raised Single Rub Rail
- 1 Front & 2 Side Handles on Tubes
- 2 Inside Bow Set of 2 Handles on Tubes
- 2 Inside Stern Single Handles on Tubes
- Additional Air Retaining Chamber Under the Floor
- 3 Layer Reinforced Seams
- Removable Stern Seat
- Paddles with Aluminum Shaft
- Paddle Holders
- Hand Pump
- Maintenance Kit
- Owner's Manual
-
-
SPECIFICATIONS
Boat Specifications
-
- Overall Length: 12'
- Overall Width: 5'10"
- Interior Length: 8'9"
- Interior Width: 2'9"
- Weight: 156 lbs
- Capacity: 6 persons or 1,975 lbs
- Max Motor: 30hp Short Shaft
- Rec Motor: 20hp Short Shaft
- Tube Diameter: 18"
- Air Chambers: 3 + 1
- Fabric Type: Hypalon
- Warranty: AB Inflatables 10-Year Warranty
- Hull Dimensions: 11'4" x 3'9" x 1'6"
Motor Specifications
-
- Engine Type: Yamaha F20LWPHB Four Stroke
- Horsepower: 20hp
- Cylinders: 2 cyl
- Shaft Length: 20" Long
- Steering: Tiller
- Starter: Electric + Manual
- Weight: 146 lbs
- Alternator Output: 16 amp
- Degree of Tilt: 62°- 63°
- Degree of Trim: -3° through +16°
- Full Throttle Range: 5000 - 6000 rpm
- Displacement: 432cc
- Fuel Induction System: Electronic Fuel Injection (EFI)
- Warranty: Yamaha 3-Year Warranty
Standard Features
-
- Power Tilt
- Aluminum Propeller
- Fuel Line
- Safety Lanyard
- Owner's Manual
-
This pre-owned AB Inflatables Ventus 12VL package is a rare find—garage-kept, lightly used, and showing just 11 hours on the Yamaha 20hp motor. It’s in excellent condition and comes complete with a Marlon trailer, making it ready to roll straight to the water. If you’re after a tender that’s nimble, durable, and easy to haul, this setup is dialed in.
The Ventus is a lightweight, full-length fiberglass deep-V RIB built for extra space and performance. Its deeper freeboard and spacious interior deliver a stable, dry ride, while the efficient hull design means you get great maneuverability without needing much horsepower. Whether you're cruising back to the dock for lunch or heading out for a quick fishing trip, this boat packs serious versatility into a sleek, compact frame.
Safety and comfort come standard, with features like 820 CSM Orca® Coated Fabric for added protection, a non-skid deck for confident footing, and an extra air chamber built into the hull. It’s easy to haul onto a deck or beach, making shore excursions a breeze. All in all, this Ventus package is the kind of tender that turns everyday outings into mini adventures.
Standard Features/Equipment
-
- Hand Laid Fiberglass Deep "V" Hull
- Stringer System Laminated into Hull
- Non-Skid Rubber Floor Panels
- Plastic External Transom Plate
- Aluminum Internal Transom Plate with Security Lip
- Stainless Steel Bow Eye
- (3) Stainless Steel Davit Lifting Points
- Inner Hull Drain with Plug
- Deck Condensation Plug
- Orca (CSM) Five Layer Coated Fabric
- Raised Single Rub Rail
- 1 Front & 2 Side Handles on Tubes
- 2 Inside Bow Set of 2 Handles on Tubes
- 2 Inside Stern Single Handles on Tubes
- Additional Air Retaining Chamber Under the Floor
- 3 Layer Reinforced Seams
- Removable Stern Seat
- Paddles with Aluminum Shaft
- Paddle Holders
- Hand Pump
- Maintenance Kit
- Owner's Manual
Boat Specifications
-
- Overall Length: 12'
- Overall Width: 5'10"
- Interior Length: 8'9"
- Interior Width: 2'9"
- Weight: 156 lbs
- Capacity: 6 persons or 1,975 lbs
- Max Motor: 30hp Short Shaft
- Rec Motor: 20hp Short Shaft
- Tube Diameter: 18"
- Air Chambers: 3 + 1
- Fabric Type: Hypalon
- Warranty: AB Inflatables 10-Year Warranty
- Hull Dimensions: 11'4" x 3'9" x 1'6"
Motor Specifications
-
- Engine Type: Yamaha F20LWPHB Four Stroke
- Horsepower: 20hp
- Cylinders: 2 cyl
- Shaft Length: 20" Long
- Steering: Tiller
- Starter: Electric + Manual
- Weight: 146 lbs
- Alternator Output: 16 amp
- Degree of Tilt: 62°- 63°
- Degree of Trim: -3° through +16°
- Full Throttle Range: 5000 - 6000 rpm
- Displacement: 432cc
- Fuel Induction System: Electronic Fuel Injection (EFI)
- Warranty: Yamaha 3-Year Warranty
Standard Features
-
- Power Tilt
- Aluminum Propeller
- Fuel Line
- Safety Lanyard
- Owner's Manual
