Achilles HB-385DX with Basic Console | HB385DX

Achilles Basic 385DX modular console for inflatable boats.

SKU#
Basic HB-385DX
$23,998.00
$22,995.00
(You save $1,003.00 )
Model:
HB-385DX
Type:
Console RIB
Floor:
Fiberglass Hull
Length:
12'8"
Beam:
5'11"
Dry Weight:
557 lbs
Capacity:
7 persons
Max Motor:
40hp Long Shaft
Material:
Hypalon
Available Options
  • Description

    The Achilles Basic Modular Consoles Boat are a great choice for simple tenders and taxis that do not need extra seating. These boats can be kept plain-jane or set-up with electronics and features for most any type of application including fishing and diving. Included in each build will be a basic modular console with internal storage for a battery or small fuel tank. A bench seat with underseat storage and cushions come standard and we rig these basically with steering cables and fuel tanks, but no gauges or extra amenities. This console and seat install can fit into a 280DX or all the way up to the 385DX, rigged with a 10HP or up to a 40HP for the larger models.

    Boat Specifications

    • LOA: 12'8"
    • Beam: 5'11"
    • Weight: 343 lbs (Boat Only)
    • Total Weight: 557 lbs Dry
    • Capacity: 7 persons or 1790 lbs
    • Max Motor: 40 hp Long
    • Rec Motor: 20-40 hp Long
    • Tube Diameter: 18"
    • Air Chambers: 4
    • Fuel Tank: External 6 Gal
    • Fabric Type: Hypalon
    • Factory Warranty: 5 years

    Standard Features

    Four layer seam construction, Deep "V" fiberglass hull, Bow locker, Full length rub strake, Extra seat attachment patches, Helmsman grip, Removable wooden rowing seat, Towing bridle D-rings, Stainless bow eye, Lifting hardware for davits, Molded rubber bow handle & carry handles, Webbed passenger handles, Interior oar straps, Paddle, Gas tank tie down hardware, Transom plate, Bailer valve, Foot pump, Maintenance kit

    Motor Specifications

    • Engine Type: Yamaha F40LA 4-stroke
    • Horsepower: 40 hp
    • Cylinders: 3 cyl
    • Shaft Length: 20"
    • Steering: Remote mech
    • Starter: Electric
    • Weight: 214 lbs
    • Full Throttle Range: 5000 - 6000 rpm
    • Displacement: 747cc
    • Induction System: EFI
    • Warranty: 3 years

    Standard Features

    Electric start, remote mech steering, power tilt and trim, aluminum propeller

    Standard Rigging

    Sidemount remote control with harness, analog tach and trim gauge, control cables, 6 gal fuel tank

The Achilles Basic Modular Consoles Boat are a great choice for simple tenders and taxis that do not need extra seating. These boats can be kept plain-jane or set-up with electronics and features for most any type of application including fishing and diving. Included in each build will be a basic modular console with internal storage for a battery or small fuel tank. A bench seat with underseat storage and cushions come standard and we rig these basically with steering cables and fuel tanks, but no gauges or extra amenities. This console and seat install can fit into a 280DX or all the way up to the 385DX, rigged with a 10HP or up to a 40HP for the larger models.

Boat Specifications

  • LOA: 12'8"
  • Beam: 5'11"
  • Weight: 343 lbs (Boat Only)
  • Total Weight: 557 lbs Dry
  • Capacity: 7 persons or 1790 lbs
  • Max Motor: 40 hp Long
  • Rec Motor: 20-40 hp Long
  • Tube Diameter: 18"
  • Air Chambers: 4
  • Fuel Tank: External 6 Gal
  • Fabric Type: Hypalon
  • Factory Warranty: 5 years

Standard Features

Four layer seam construction, Deep "V" fiberglass hull, Bow locker, Full length rub strake, Extra seat attachment patches, Helmsman grip, Removable wooden rowing seat, Towing bridle D-rings, Stainless bow eye, Lifting hardware for davits, Molded rubber bow handle & carry handles, Webbed passenger handles, Interior oar straps, Paddle, Gas tank tie down hardware, Transom plate, Bailer valve, Foot pump, Maintenance kit

Motor Specifications

  • Engine Type: Yamaha F40LA 4-stroke
  • Horsepower: 40 hp
  • Cylinders: 3 cyl
  • Shaft Length: 20"
  • Steering: Remote mech
  • Starter: Electric
  • Weight: 214 lbs
  • Full Throttle Range: 5000 - 6000 rpm
  • Displacement: 747cc
  • Induction System: EFI
  • Warranty: 3 years

Standard Features

Electric start, remote mech steering, power tilt and trim, aluminum propeller

Standard Rigging

Sidemount remote control with harness, analog tach and trim gauge, control cables, 6 gal fuel tank

Additional Prep/DMV Info

Dealer Engine Prep

Dealer Engine Prep is required to validate the warranty and ensure a working engine. Prep includes completing a full Original Equipment Manufacturer (OEM) checklist, test-run performed in a tank for quality assurance, and re-crating for shipment. Outboards picked up in-store may be stand-alone and no longer in the box or crate.

Pre-Delivery Inspection

Pre-delivery Inspection is required to validate the warranty and includes the necessary services & products used on each new vessel to ensure quality performance prior to delivery.

For rigged vessels: Boat Specialists will install a deep cycle marine battery, rig all steering components, and complete an electrical and systems check. A full system check includes filling the motor with oil, fluids, and fuel, then a test run performed in a tank for quality assurance.

Once everything is tuned and prepared, a sea trial is performed to achieve the ideal RPM-to-top-speed ratio, ensuring the boat gets on plane properly and all systems operate on water. Afterward, full detail is performed on the exterior, deck, and hull to be turn-key ready for the customer.

DMV Registration On Boats and Trailers - For California Residents Only

Boat Specialists will take care of your CA DMV registration including signing a Power of Attorney for each registration. We will mail temporary paperwork with the documents that require the customer's signature. The customer is to sign and return the documents in the envelope provided. Once we have received the paperwork, we will submit all required documents to the DMV to complete registration.

YOU MAY ALSO LIKE…