AKA Marine FIB HC-SERIES | F43HR

AKA Marine FIB HC-SERIES | F43H - C

SKU#
AKA Marine F43H - C
MSRP: $7,512.00
PRICE: $7,212.00
(You save $300.00 )
Shipping:
$295
Model:
AKF43HR
Type:
Roll Up
Max Motor:
50hp Long Shaft
Length:
14'1"
Beam:
6'2"
Boat Weight:
256 lbs
Capacity:
8 persons
Material:
Hypalon
Tube Color:
Red
Promotions:
Hot Deal
Subtotal:
MSRP: $7,512.00
PRICE: $7,212.00
(You save $300.00 )
Available Options
Adding to cart… The item has been added
Rates are for quote purposes only and may not reflect actual shipping costs. Real-time rates will be provided at check-out. For shipping outside the US or a personalized quote, please call 805-644-6290. Shipping Terms
  • Description

    The FIB Series by AKA Marine is a highly adaptable range of foldable boats that boasts a robust aluminum floor and rigid keel, ensuring exceptional durability and accommodating a payload of up to 1.15 tons.

    Key Featurs

      • Non-skid Aluminum Floor with built-in rails and stringers
      • Inflatable Keel with full length bottom strake
      • Bow Floorboard, Wood
      • Marine plywood transom
      • Stern lifting points
      • Stern towing points
      • High Capacity Bailers (elephant trunk type)
      • Aluminum engine mounting plate
      • Lacing cuff and safety grab lines
      • Extra fabric seating pads
      • Heavy Duty, anti-chafing, bow fender system
      • Leafield Inflation Valves
      • Leafield Pressure Relief Valves
      • Large Profile Rubbing Strake
      • Carry Handles
      • Bow carry handle
      • Large Diameter tow rings
      • Bow Lifting rings
      • Paddle retainers
      • Reinforced Cone Ends

    Note: Boat images may be different than production models.

  • SPECIFICATIONS
    Boat Specifications
      • LOA: 14'1"
      • Beam: 6'2"
      • Weight: 256 lbs (Boat Only)
      • Capacity: 8 persons or 2,094 lbs
      • Max Motor: 50hp Long
      • Tube Diameter:19"
      • Air Chambers: 3
      • Fabric Type: Hypalon
    Motor Specifications - Motor not included
    •  

     

The FIB Series by AKA Marine is a highly adaptable range of foldable boats that boasts a robust aluminum floor and rigid keel, ensuring exceptional durability and accommodating a payload of up to 1.15 tons.

Key Featurs

    • Non-skid Aluminum Floor with built-in rails and stringers
    • Inflatable Keel with full length bottom strake
    • Bow Floorboard, Wood
    • Marine plywood transom
    • Stern lifting points
    • Stern towing points
    • High Capacity Bailers (elephant trunk type)
    • Aluminum engine mounting plate
    • Lacing cuff and safety grab lines
    • Extra fabric seating pads
    • Heavy Duty, anti-chafing, bow fender system
    • Leafield Inflation Valves
    • Leafield Pressure Relief Valves
    • Large Profile Rubbing Strake
    • Carry Handles
    • Bow carry handle
    • Large Diameter tow rings
    • Bow Lifting rings
    • Paddle retainers
    • Reinforced Cone Ends

Note: Boat images may be different than production models.

Boat Specifications
    • LOA: 14'1"
    • Beam: 6'2"
    • Weight: 256 lbs (Boat Only)
    • Capacity: 8 persons or 2,094 lbs
    • Max Motor: 50hp Long
    • Tube Diameter:19"
    • Air Chambers: 3
    • Fabric Type: Hypalon
Motor Specifications - Motor not included
  •  

 

Additional Prep/DMV Info

Dealer Engine Prep

Dealer Engine Prep is required to validate the warranty and ensure a working engine. Prep includes completing a full Original Equipment Manufacturer (OEM) checklist, test-run performed in a tank for quality assurance, and re-crating for shipment. Outboards picked up in-store may be stand-alone and no longer in the box or crate.

Pre-Delivery Inspection

Pre-delivery Inspection is required to validate the warranty and includes the necessary services & products used on each new vessel to ensure quality performance prior to delivery.

For rigged vessels: Boat Specialists will install a deep cycle marine battery, rig all steering components, and complete an electrical and systems check. A full system check includes filling the motor with oil, fluids, and fuel, then a test run performed in a tank for quality assurance.

Once everything is tuned and prepared, a sea trial is performed to achieve the ideal RPM-to-top-speed ratio, ensuring the boat gets on plane properly and all systems operate on water. Afterward, full detail is performed on the exterior, deck, and hull to be turn-key ready for the customer.

DMV Registration On Boats and Trailers - For California Residents Only

Boat Specialists will take care of your CA DMV registration including signing a Power of Attorney for each registration. We will mail temporary paperwork with the documents that require the customer's signature. The customer is to sign and return the documents in the envelope provided. Once we have received the paperwork, we will submit all required documents to the DMV to complete registration.

YOU MAY ALSO LIKE…