FINANCING AVAILABLE
-
Description
The Mercury 40ELPT is a 40hp four-stroke outboard with remote mechanical controls, electric start, power trim and tilt, and a 20" long shaft, weighing 234 lbs. A good match for aluminum fishing boats, pontoons, RIBs and small fiberglass boats. As an authorized Mercury dealer, Boat Specialists sells it new with the full Mercury 3-year factory warranty, after our factory-qualified technicians test-run it.
Mercury's 40hp FourStroke pairs no-worry reliability with strong low-end torque and electronic fuel injection for reliable starts, quick acceleration and instant throttle response. A high-output alternator keeps batteries charged and fishing electronics running.
REQUIRED FEE
$335 Dealer Engine Prep - Our factory-qualified technicians perform a full test run of your new outboard by unpacking it and connecting it to the rigging, fuel, battery, and a diagnostic computer. We run the motor up to operating temperature and test every function to make sure your new motor is working just as it should. The manufacturer's required inspection checklist is completed and submitted to the manufacturer to validate the warranty.
Mercury 40ELPT FAQ
What size boat is the Mercury 40ELPT for?
A good match for aluminum fishing boats, pontoons, RIBs and small fiberglass boats. Always check your boat's capacity plate for its maximum horsepower and weight.
Do I need a short or long shaft?
Measure your transom from the top edge straight down to the bottom of the hull: about 15" calls for a short shaft, 20" for a long shaft, 25" for an extra-long shaft, and 30" for an ultra-long shaft. The 40ELPT has a 20" long shaft. Not sure? Call or text us at (805) 644-6290 and we'll help you choose.
What comes with the 40ELPT?
Standard features and included items: power trim & tilt, service tool kit & parts, stop switch lanyard, and owner's manual.
What do I need to buy separately?
Any controls, gauges or rigging your boat needs are sold separately. We can help you pick the right parts, and our team can rig it for you.
What warranty does it come with?
It's covered by the full Mercury 3-year warranty. See our Brand Warranties page for details, and ask about extended warranties.
Do you offer financing?
Yes. Financing is available on new outboards. See our Financing page to learn more and apply online, or call or text (805) 644-6290.
Can you install and service it?
Yes. We service what we sell. Our certified technicians handle rigging, repowers and routine service at our Ventura parts and service center. Call or text (805) 644-6290, or book an appointment online.
Why Buy from Boat Specialists
- Family owned and operated since 1976
- Authorized Mercury outboard dealer
- We service what we sell, with certified technicians at our Ventura parts and service center
- We ship nationwide
- Showrooms in Ventura and Richmond, CA. Call or text (805) 644-6290, Monday to Friday, 9am to 5pm PT
-
SPECIFICATIONS
Mercury 40ELPT Specifications
-
- Engine Type: Mercury 40ELPT Inline 3 Four Stroke
- Horsepower: 40hp
- Cylinders: 3 cyl
- Shaft Length: 20" Long
- Steering: Remote Mechanical
- Starting: Electric
- Weight: 234 lbs
- Alternator: 18 amp / 226 watt
- Full Throttle Range: 5500 - 6000 rpm
- Displacement: 747cc
- Fuel System: Electronic Fuel Injection (EFI)
- Fuel Induction System: 6-valve, SOHC
- Warranty: Mercury Marine 3-Year Warranty
Mercury 40ELPT Standard Features
-
- Power Trim & Tilt
- Service Tool Kit & Parts
- Stop Switch Lanyard
- Owner's Manual
*Please note: Mercury 40hp Outboards do not include External Fuel Tanks, Fuel Lines or Prop's. These can be purchased online or walk-in via our parts counter.
-
- VIDEOS
The Mercury 40ELPT is a 40hp four-stroke outboard with remote mechanical controls, electric start, power trim and tilt, and a 20" long shaft, weighing 234 lbs. A good match for aluminum fishing boats, pontoons, RIBs and small fiberglass boats. As an authorized Mercury dealer, Boat Specialists sells it new with the full Mercury 3-year factory warranty, after our factory-qualified technicians test-run it.
Mercury's 40hp FourStroke pairs no-worry reliability with strong low-end torque and electronic fuel injection for reliable starts, quick acceleration and instant throttle response. A high-output alternator keeps batteries charged and fishing electronics running.
REQUIRED FEE
$335 Dealer Engine Prep - Our factory-qualified technicians perform a full test run of your new outboard by unpacking it and connecting it to the rigging, fuel, battery, and a diagnostic computer. We run the motor up to operating temperature and test every function to make sure your new motor is working just as it should. The manufacturer's required inspection checklist is completed and submitted to the manufacturer to validate the warranty.
Mercury 40ELPT FAQ
What size boat is the Mercury 40ELPT for?
A good match for aluminum fishing boats, pontoons, RIBs and small fiberglass boats. Always check your boat's capacity plate for its maximum horsepower and weight.
Do I need a short or long shaft?
Measure your transom from the top edge straight down to the bottom of the hull: about 15" calls for a short shaft, 20" for a long shaft, 25" for an extra-long shaft, and 30" for an ultra-long shaft. The 40ELPT has a 20" long shaft. Not sure? Call or text us at (805) 644-6290 and we'll help you choose.
What comes with the 40ELPT?
Standard features and included items: power trim & tilt, service tool kit & parts, stop switch lanyard, and owner's manual.
What do I need to buy separately?
Any controls, gauges or rigging your boat needs are sold separately. We can help you pick the right parts, and our team can rig it for you.
What warranty does it come with?
It's covered by the full Mercury 3-year warranty. See our Brand Warranties page for details, and ask about extended warranties.
Do you offer financing?
Yes. Financing is available on new outboards. See our Financing page to learn more and apply online, or call or text (805) 644-6290.
Can you install and service it?
Yes. We service what we sell. Our certified technicians handle rigging, repowers and routine service at our Ventura parts and service center. Call or text (805) 644-6290, or book an appointment online.
Why Buy from Boat Specialists
- Family owned and operated since 1976
- Authorized Mercury outboard dealer
- We service what we sell, with certified technicians at our Ventura parts and service center
- We ship nationwide
- Showrooms in Ventura and Richmond, CA. Call or text (805) 644-6290, Monday to Friday, 9am to 5pm PT
Mercury 40ELPT Specifications
-
- Engine Type: Mercury 40ELPT Inline 3 Four Stroke
- Horsepower: 40hp
- Cylinders: 3 cyl
- Shaft Length: 20" Long
- Steering: Remote Mechanical
- Starting: Electric
- Weight: 234 lbs
- Alternator: 18 amp / 226 watt
- Full Throttle Range: 5500 - 6000 rpm
- Displacement: 747cc
- Fuel System: Electronic Fuel Injection (EFI)
- Fuel Induction System: 6-valve, SOHC
- Warranty: Mercury Marine 3-Year Warranty
Mercury 40ELPT Standard Features
-
- Power Trim & Tilt
- Service Tool Kit & Parts
- Stop Switch Lanyard
- Owner's Manual
*Please note: Mercury 40hp Outboards do not include External Fuel Tanks, Fuel Lines or Prop's. These can be purchased online or walk-in via our parts counter.
