Seakeeper Ride 525 for Boats 27 to 30 ft

For boats that hit the sweet spot—not too big, not too small—the Seakeeper Ride 525 delivers just‑right stability. Designed for vessels 27–30 feet, it applies precise lifting forces to eliminate the effects of pitch and roll while underway, transforming every ride into a smoother, more confident experience

How it Works

Seakeeper Ride controllers are mounted to your boat’s transom, below the waterline. Using custom, proprietary inertial-sensing hardware and software, the system understands how the boat is behaving in all three axes and commands the deployment of the rotary blades to counteract pitch, roll, and yaw. As the blades are deployed, they create lift at the transom, thereby instantaneously managing the vessel’s motion.

Wave motions can occur consistently or inconsistently, be big or small, and come from any direction. Often, these motions occur in just milliseconds. Thanks to expert control software and hardware, Seakeeper Ride’s proprietary, rapid-deployment rotary blades make 100 adjustments every second to combat wave motions.

Nothing compares to the first-of-its-kind Vessel Attitude Control System, Seakeeper Ride, which can eliminate up to 70% pitch and roll underway.

Kit Includes

• • 1 Port & 1 Starboard Controller: Seakeeper Ride controllers are installed on the transom on either side of the engine(s)
  • Software Module: The “brain” of the system that includes Seakeeper’s proprietary software and motion sensors.
  • Distribution Module: Provides power and communication between the controllers and the software module.
  • Keypad (Optional): Physical, mountable keypad that can be used outside of the MFD application.
  • Installation Not Included.*

*Installation and labor costs are not included. Installations vary, additional parts may be needed. Please contact a Boat Specialists representative at 805-644-6290 for detailed installation pricing.

Additional Features

Rapid Actuation

Rotary blades deploy at a rate of up to 300 mm per second, making 100 adjustments every second; enabled by a power-dense rotary design that requires just 7-10 Amps for operation.

Full Underway Control

Controls all motions (pitch, roll, yaw) thanks to deployment speed and proprietary control software and hardware.

Intuitive

Predicts motion and responds instantaneously to eliminate them before they’re felt with no buttons to push nor adjustments to make, providing a boating experience you never imagined.

Reliable

The drivetrain is completely sealed in a dry, greased environment with no mechanical exposure to saltwater.

Simple Installation

Easily installed on most transoms, both in new and aftermarket boats.