AB Jet 330 | Rotax Jet Propulsion | ABJET 330

ABJet 330 Inflatable Console Boat.

SKU#
ABJET 330 GEN
$42,360.00

or $483/month

Estimated monthly payment based on 120-month loan at 9% APR and 10% down. Additional options and salestax not included. Actual rates and terms are based on indv credit.

Model:
ABJET 330
Type:
Console RIB
Engine:
Rotax 4-TEC 90 ECT
Length:
10'10"
Beam:
5'8"
Boat Weight:
728 lbs
Capacity:
5 persons
Material:
Hypalon
Available Options
  • Description
    The AB Jet S Series has become the benchmark in the 9.5ft (2.90mts) to 12ft (3.86mts) jet segment. The AB Jet S Series is designed to comfortably seat two people at the pilot's seat, offering the most efficient passenger capacity in its segment. With a flat floor deck free of obstructions, an ergonomically positioned throttle, a sport console with cupholders, a convenient platform with a stainless-steel sliding ladder, stainless-steel handles and rails, provide a seamless experience on the water. 
    Key Features/Standard Equipment
      • Integrated Marine Aluminum Fuel Tank 
      • Rear Seat with Ample Storage
      • Molded-In Console and Forward Seat
      • Easy Port & Starboard Access
      • Ample Engine Room Access
      • 4 Stainless Steel Davit Lifting Points
      • Stainless Steel Transom Tie Downs
      • Self-Bailing Deck System with Non-Return Valves
      • ORCA (CSM) 1100 D-Tex Fabric
      • Single Solid Rub Rail
      • Automatic Fire Extinguisher Device
      • Automatic 500 GPH Bilge Pump
      • Battery Switch
      • Engine Compartment In-Line Blower
      • Mechanical Steering System
      • Control Panel with Fuel Gauge
      • Gas Springs
      • Hand Pump & Maintenance Kit
      • Battery Tray
      • Rubber Bulb Water Tight Console Seal
      • Muffler & Silencer
      • Diamond Non-Skid Deck
      • Fully Upholstered (Closed Cell) Console & Seatings
      • Integrated Bow Locker
      • Stainless Steel Port/Starboard Hand Rail
      • Stainless Steel Bow Eye
      • Stainless Steel Stern Ski-Eye & Stern Hand Rail
      • 2 Stern Stainless Steel Foldable Cleats
      • Stainless Steel Drain Plugs
      • Non-Corrosive Push-Push Inflation Valves
      • Reinforced External Seams
      • Safety Lanyard Switch
      • Removable Pole LED Navigation & Anchor Light
      • Maintenance-Free Battery
      • Sport Wheel
      • Complete Tin Wiring & (Head) Heat Shrink Seal Terminals
      • Shift Control
      • Under Platform Sliding Ladder
      • 2 Recessed Drink Holders
      • Catalytic Exhaust System
      • Owner's Manual
    Required Fees
    00 Destination Fee - Fee charged by a manufacturer to ship product to dealerships.
     
    00 Pre-delivery Inspection - Fee requested by manufacturers for preparing & testing the vessel on & off the water for turn-key delivery. Validates warranties.
  • SPECIFICATIONS
    Boat Specifications
      • LOA: 10' 10"
      • Beam: 5' 8"
      • Weight: 728 lbs (Includes Rotax Engine)
      • Capacity: 5 persons
      • Max Motor: 90hp
      • Tube Diameter: 16"
      • Air Chambers: 4
      • Fuel Tank: 10 gallons
      • Fabric Type: Hypalon
      • Warranty: AB Inflatable 10-Year Warranty
    Motor Specifications
      • Engine Type: Rotax 4-TEC 90 ECT Four Stroke
      • Horsepower: 90hp
      • Cylinders: 3 cyl
      • Steering: Remote Mechanical
      • Starter: Electric
      • Weight: (Included in Boat Weight)
      • Displacement: 1,494 cc
      • Induction System: EFI
  • VIDEOS
The AB Jet S Series has become the benchmark in the 9.5ft (2.90mts) to 12ft (3.86mts) jet segment. The AB Jet S Series is designed to comfortably seat two people at the pilot's seat, offering the most efficient passenger capacity in its segment. With a flat floor deck free of obstructions, an ergonomically positioned throttle, a sport console with cupholders, a convenient platform with a stainless-steel sliding ladder, stainless-steel handles and rails, provide a seamless experience on the water. 
Key Features/Standard Equipment
    • Integrated Marine Aluminum Fuel Tank 
    • Rear Seat with Ample Storage
    • Molded-In Console and Forward Seat
    • Easy Port & Starboard Access
    • Ample Engine Room Access
    • 4 Stainless Steel Davit Lifting Points
    • Stainless Steel Transom Tie Downs
    • Self-Bailing Deck System with Non-Return Valves
    • ORCA (CSM) 1100 D-Tex Fabric
    • Single Solid Rub Rail
    • Automatic Fire Extinguisher Device
    • Automatic 500 GPH Bilge Pump
    • Battery Switch
    • Engine Compartment In-Line Blower
    • Mechanical Steering System
    • Control Panel with Fuel Gauge
    • Gas Springs
    • Hand Pump & Maintenance Kit
    • Battery Tray
    • Rubber Bulb Water Tight Console Seal
    • Muffler & Silencer
    • Diamond Non-Skid Deck
    • Fully Upholstered (Closed Cell) Console & Seatings
    • Integrated Bow Locker
    • Stainless Steel Port/Starboard Hand Rail
    • Stainless Steel Bow Eye
    • Stainless Steel Stern Ski-Eye & Stern Hand Rail
    • 2 Stern Stainless Steel Foldable Cleats
    • Stainless Steel Drain Plugs
    • Non-Corrosive Push-Push Inflation Valves
    • Reinforced External Seams
    • Safety Lanyard Switch
    • Removable Pole LED Navigation & Anchor Light
    • Maintenance-Free Battery
    • Sport Wheel
    • Complete Tin Wiring & (Head) Heat Shrink Seal Terminals
    • Shift Control
    • Under Platform Sliding Ladder
    • 2 Recessed Drink Holders
    • Catalytic Exhaust System
    • Owner's Manual
Required Fees
00 Destination Fee - Fee charged by a manufacturer to ship product to dealerships.
 
00 Pre-delivery Inspection - Fee requested by manufacturers for preparing & testing the vessel on & off the water for turn-key delivery. Validates warranties.
Boat Specifications
    • LOA: 10' 10"
    • Beam: 5' 8"
    • Weight: 728 lbs (Includes Rotax Engine)
    • Capacity: 5 persons
    • Max Motor: 90hp
    • Tube Diameter: 16"
    • Air Chambers: 4
    • Fuel Tank: 10 gallons
    • Fabric Type: Hypalon
    • Warranty: AB Inflatable 10-Year Warranty
Motor Specifications
    • Engine Type: Rotax 4-TEC 90 ECT Four Stroke
    • Horsepower: 90hp
    • Cylinders: 3 cyl
    • Steering: Remote Mechanical
    • Starter: Electric
    • Weight: (Included in Boat Weight)
    • Displacement: 1,494 cc
    • Induction System: EFI

Additional Prep/DMV Info

Dealer Engine Prep

Dealer Engine Prep is required to validate the warranty and ensure a working engine. Prep includes completing a full Original Equipment Manufacturer (OEM) checklist, test-run performed in a tank for quality assurance, and re-crating for shipment. Outboards picked up in-store may be stand-alone and no longer in the box or crate.

Pre-Delivery Inspection

Pre-delivery Inspection is required to validate the warranty and includes the necessary services & products used on each new vessel to ensure quality performance prior to delivery.

For rigged vessels: Boat Specialists will install a deep cycle marine battery, rig all steering components, and complete an electrical and systems check. A full system check includes filling the motor with oil, fluids, and fuel, then a test run performed in a tank for quality assurance.

Once everything is tuned and prepared, a sea trial is performed to achieve the ideal RPM-to-top-speed ratio, ensuring the boat gets on plane properly and all systems operate on water. Afterward, full detail is performed on the exterior, deck, and hull to be turn-key ready for the customer.

DMV Registration On Boats and Trailers - For California Residents Only

Boat Specialists will take care of your CA DMV registration including signing a Power of Attorney for each registration. We will mail temporary paperwork with the documents that require the customer's signature. The customer is to sign and return the documents in the envelope provided. Once we have received the paperwork, we will submit all required documents to the DMV to complete registration.

YOU MAY ALSO LIKE…