FINANCING AVAILABLE
-
Description
2021 Pre-Owned AB Inflatables 10AL with a Yamaha 9.9hp in pretty decent shape. The boat has a plumbed in fuel line and fuel tank in the bow locker and is ready to go. Both the boat and motor were serviced, and the fuel system was flushed. This AB 10AL is in great shape for anyone looking for a quality dinghy ready to go. See it for yourself at our Ventura, CA Dealership.
World-renowned, innovative design created to fit your needs. This light-weight, hard-bottomed open tender is perfect for boats with lighter capacity davits. Featuring a tough aluminum hull for weight reduction and durability, this solidly constructed hull provides years of reliable use.
The Lammina AL easily cuts through wakes and chop with a lower horsepower than fiberglass tenders. A full-length rubber keel protector enables you to cruise through unknown areas without worry, and its double layer floor guarantee a dry deck and a stable ride. The bow locker serves as a convenient boarding step and comfortable seat for guests. You can also use it to store a portable fuel tank where the fuel line passes underneath the floor, leaving the deck free of obstructions. As an important key feature, the models from 8 to 10ft come with an 820 CSM Orca® Coated Fabric, it offers the thickest and strongest fabric in their segment which brings extra protection. The versatile full-sized Lammina AL has a modular design with customizable seating and console choices.
AB Inflatable's chrome-free Pretreatment and Powder Coating Technology offers a superior coating adherence. These include lifting and towing eyes vertically positioned to avoid these from bending and reinforced transom knees.
Standard Features/Equipment
-
- Deep “V” Marine Grade Bare Aluminum Hull
- Heavy Duty Transom Knee
- Stringer System Welded Under Aluminum Deck
- Non-Skid Rubber Floor Panels
- Plastic External Transom Plate
- Aluminum Internal Transom Plate with Security Lip
- Aluminum Bow Eye
- 3-4 Aluminum Davit Lifting Points
- Aluminum Transom Tie Down & Towing Rings
- Deck Drain with Plug
- Orca (CSM) Five Layer Coated Fabric
- Raised Single Rub Rail
- Push Push Plastic Non-Corrosive 2 Stage Inflation Valves
- 1 Front & 2 Side Orca (CSM) Fabric Handles on Tubes
- 2 Inside Bow Sets of Double Orca (CSM) Fabric Handles on Tubes
- 2 Inside Stern Single Orca (CSM) Fabric Handles on Tubes
- Removable Rowing Seat
- Oarlock Base
- Telescopic Oars with Aluminum Shaft
- 3 Layers Reinforced Seams
- Rubber Protector on Full Length of Keel
- Paddle Holders
Please note that pricing on individual boats, motors. and trailers is exclusive to each unit's VIN number and can not be applied to other units. Click here to read our Terms of Sale.
-
-
SPECIFICATIONS
Boat Specifications
-
- Overall Length: 10'6"
- Overall Beam: 5'6"
- Interior Length: 7'6"
- Interior Beam: 2'8"
- Weight: 143 lbs
- Capacity: 5 persons or 1,519 lbs
- Engine: Yamaha 9.9hp Outboard
- Tube Diameter: 17"
- Air Chambers: 3
- Fabric Type: Hypalon
Motor Specifications
- Horsepower: 9.9hp
- Cylinders: 2 cyl
- Shaft Length: 15" Short
- Steering: Tiller
- Starter: Manual
- Weight: 87 lbs
- Trim/Tilt: Manual
- Alternator Output: 6 amp
- Degree of Tilt: 71°
- Degree of Trim: -4° through +16°
- Full Throttle Range: 5000 - 6000 rpm
- Displacement: 212cc
- Fuel Induction System: Carb
-
- VIDEOS
2021 Pre-Owned AB Inflatables 10AL with a Yamaha 9.9hp in pretty decent shape. The boat has a plumbed in fuel line and fuel tank in the bow locker and is ready to go. Both the boat and motor were serviced, and the fuel system was flushed. This AB 10AL is in great shape for anyone looking for a quality dinghy ready to go. See it for yourself at our Ventura, CA Dealership.
World-renowned, innovative design created to fit your needs. This light-weight, hard-bottomed open tender is perfect for boats with lighter capacity davits. Featuring a tough aluminum hull for weight reduction and durability, this solidly constructed hull provides years of reliable use.
The Lammina AL easily cuts through wakes and chop with a lower horsepower than fiberglass tenders. A full-length rubber keel protector enables you to cruise through unknown areas without worry, and its double layer floor guarantee a dry deck and a stable ride. The bow locker serves as a convenient boarding step and comfortable seat for guests. You can also use it to store a portable fuel tank where the fuel line passes underneath the floor, leaving the deck free of obstructions. As an important key feature, the models from 8 to 10ft come with an 820 CSM Orca® Coated Fabric, it offers the thickest and strongest fabric in their segment which brings extra protection. The versatile full-sized Lammina AL has a modular design with customizable seating and console choices.
AB Inflatable's chrome-free Pretreatment and Powder Coating Technology offers a superior coating adherence. These include lifting and towing eyes vertically positioned to avoid these from bending and reinforced transom knees.
Standard Features/Equipment
-
- Deep “V” Marine Grade Bare Aluminum Hull
- Heavy Duty Transom Knee
- Stringer System Welded Under Aluminum Deck
- Non-Skid Rubber Floor Panels
- Plastic External Transom Plate
- Aluminum Internal Transom Plate with Security Lip
- Aluminum Bow Eye
- 3-4 Aluminum Davit Lifting Points
- Aluminum Transom Tie Down & Towing Rings
- Deck Drain with Plug
- Orca (CSM) Five Layer Coated Fabric
- Raised Single Rub Rail
- Push Push Plastic Non-Corrosive 2 Stage Inflation Valves
- 1 Front & 2 Side Orca (CSM) Fabric Handles on Tubes
- 2 Inside Bow Sets of Double Orca (CSM) Fabric Handles on Tubes
- 2 Inside Stern Single Orca (CSM) Fabric Handles on Tubes
- Removable Rowing Seat
- Oarlock Base
- Telescopic Oars with Aluminum Shaft
- 3 Layers Reinforced Seams
- Rubber Protector on Full Length of Keel
- Paddle Holders
Please note that pricing on individual boats, motors. and trailers is exclusive to each unit's VIN number and can not be applied to other units. Click here to read our Terms of Sale.
Boat Specifications
-
- Overall Length: 10'6"
- Overall Beam: 5'6"
- Interior Length: 7'6"
- Interior Beam: 2'8"
- Weight: 143 lbs
- Capacity: 5 persons or 1,519 lbs
- Engine: Yamaha 9.9hp Outboard
- Tube Diameter: 17"
- Air Chambers: 3
- Fabric Type: Hypalon
Motor Specifications
- Horsepower: 9.9hp
- Cylinders: 2 cyl
- Shaft Length: 15" Short
- Steering: Tiller
- Starter: Manual
- Weight: 87 lbs
- Trim/Tilt: Manual
- Alternator Output: 6 amp
- Degree of Tilt: 71°
- Degree of Trim: -4° through +16°
- Full Throttle Range: 5000 - 6000 rpm
- Displacement: 212cc
- Fuel Induction System: Carb
