Inflatable Boat Leak Seal

Inflatable Boat Leak Seal

SKU#
Leak Seal-QU
$49.95
Condition:
New
Subtotal:
$49.95
Available Options
Adding to cart… The item has been added
Rates are for quote purposes only and may not reflect actual shipping costs. Real-time rates will be provided at check-out. For shipping outside the US or a personalized quote, please call 805-644-6290. Shipping Terms
  • Description

    Inflatable Boat Specialist's "Leak Seal" is designed for small leaks that are often very hard to locate and patch from the outside of the inflatable. Our latex casting agent is suitable for PVC and Hypalon inflatable boats as well as kayaks, rafts, and inflatable paddleboards. This sealant forms a bond with the interior of the inflatable's chamber, stopping and sealing leaks while often preventing future leaks. With proper drying and curing time, "Leak Seal" will prevent the inside of the tubes from sticking together, allowing boaters to deflate for storage and reinflate with no issue.

    Directions for Use: Pour into valve and then roll boat to distribute throughout the inside of the tube chamber. Every 10-15 minutes, change the angle the boat is resting on and continue this for one hour. WARNING: Keep the boat fully inflated for at least two weeks to allow the product to fully cure. Estimate about 32 ounces for large tube chambers, less for small chambers, more for extra large chambers.

    Leak Seal Specifications

    • Bottle Size: 32 ounces or 128 ounces
    • Time to Cure: Two Weeks
    • Usage: One Quart for One Large Tube Chamber
    • Shelf Life: One Year

Inflatable Boat Specialist's "Leak Seal" is designed for small leaks that are often very hard to locate and patch from the outside of the inflatable. Our latex casting agent is suitable for PVC and Hypalon inflatable boats as well as kayaks, rafts, and inflatable paddleboards. This sealant forms a bond with the interior of the inflatable's chamber, stopping and sealing leaks while often preventing future leaks. With proper drying and curing time, "Leak Seal" will prevent the inside of the tubes from sticking together, allowing boaters to deflate for storage and reinflate with no issue.

Directions for Use: Pour into valve and then roll boat to distribute throughout the inside of the tube chamber. Every 10-15 minutes, change the angle the boat is resting on and continue this for one hour. WARNING: Keep the boat fully inflated for at least two weeks to allow the product to fully cure. Estimate about 32 ounces for large tube chambers, less for small chambers, more for extra large chambers.

Leak Seal Specifications

  • Bottle Size: 32 ounces or 128 ounces
  • Time to Cure: Two Weeks
  • Usage: One Quart for One Large Tube Chamber
  • Shelf Life: One Year

Additional Prep/DMV Info

Dealer Engine Prep

Dealer Engine Prep is required to validate the warranty and ensure a working engine. Prep includes completing a full Original Equipment Manufacturer (OEM) checklist, test-run performed in a tank for quality assurance, and re-crating for shipment. Outboards picked up in-store may be stand-alone and no longer in the box or crate.

Pre-Delivery Inspection

Pre-delivery Inspection is required to validate the warranty and includes the necessary services & products used on each new vessel to ensure quality performance prior to delivery.

For rigged vessels: Boat Specialists will install a deep cycle marine battery, rig all steering components, and complete an electrical and systems check. A full system check includes filling the motor with oil, fluids, and fuel, then a test run performed in a tank for quality assurance.

Once everything is tuned and prepared, a sea trial is performed to achieve the ideal RPM-to-top-speed ratio, ensuring the boat gets on plane properly and all systems operate on water. Afterward, full detail is performed on the exterior, deck, and hull to be turn-key ready for the customer.

DMV Registration On Boats and Trailers - For California Residents Only

Boat Specialists will take care of your CA DMV registration including signing a Power of Attorney for each registration. We will mail temporary paperwork with the documents that require the customer's signature. The customer is to sign and return the documents in the envelope provided. Once we have received the paperwork, we will submit all required documents to the DMV to complete registration.

YOU MAY ALSO LIKE…