Railblaza Illuminate i360

Railblaza LED Navigation Light

SKU#
02-5004-11
$59.99
$59.39
(You save $0.60 )
MPN:
02-5004-11
Brand:
Railblaza
Category:
Lighting
Subtotal:
$59.99
$59.39
(You save $0.60 )
Available Options
Adding to cart… The item has been added
Rates are for quote purposes only and may not reflect actual shipping costs. Real-time rates will be provided at check-out. For shipping outside the US or a personalized quote, please call 805-644-6290. Shipping Terms
  • Description

    This stern or anchor light is battery powered and outshines all others! The iPS meets the required standards for a navigation lighting for power and sailboats under 40 feet.

    This stern light is great for use where cables can’t be run such as on some inflatables, as an emergency light, or on small, tiller steered vessels.

    Like all RAILBLAZA products, this anchor light has been designed and tested in the harsh sunlight and salt water environment of New Zealand’s oceans, meaning it will give many years of fault free service, and still look great.
    To maximise battery life, RAILBLAZA have used high quality, Osram power LEDs and a high efficiency digital circuit. It is lightweight, and IP67 rated for dust and water ingress, these features mean it will float with the lens right up out of the water and being battery powered it’s very simple to install, no external wiring and switching.


    The iPS LED navigation light is compatible with any RAILBLAZA StarPort, SidePort, RIBPort or RailMount, so can be mounted just about anywhere. 

    Key Features

    3 Operation Modes:

    • Full brightness navigation mode 2NM - Up to 25hrs battery life
    • Low brightness work mode - Up to 160hrs battery life
    • Flashing emergency mode - Over 200hrs battery life
  • SPECIFICATIONS
    Part Specifications
      • Waterproof to 3 feet
      • Floats with lens clear of water without pole attached
      • Powered by (3) AA batteries - Not included
      • Meets USCG 2NM 33 CF 183.810 & ABYC A-16
      • Fits ANY Railblaza mounting port - Ordered separately
      • Battery powered - No wires required!

    WARNING
    This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.
    For more information go to www.p65warnings.ca.gov.

This stern or anchor light is battery powered and outshines all others! The iPS meets the required standards for a navigation lighting for power and sailboats under 40 feet.

This stern light is great for use where cables can’t be run such as on some inflatables, as an emergency light, or on small, tiller steered vessels.

Like all RAILBLAZA products, this anchor light has been designed and tested in the harsh sunlight and salt water environment of New Zealand’s oceans, meaning it will give many years of fault free service, and still look great.
To maximise battery life, RAILBLAZA have used high quality, Osram power LEDs and a high efficiency digital circuit. It is lightweight, and IP67 rated for dust and water ingress, these features mean it will float with the lens right up out of the water and being battery powered it’s very simple to install, no external wiring and switching.


The iPS LED navigation light is compatible with any RAILBLAZA StarPort, SidePort, RIBPort or RailMount, so can be mounted just about anywhere. 

Key Features

3 Operation Modes:

  • Full brightness navigation mode 2NM - Up to 25hrs battery life
  • Low brightness work mode - Up to 160hrs battery life
  • Flashing emergency mode - Over 200hrs battery life
Part Specifications
    • Waterproof to 3 feet
    • Floats with lens clear of water without pole attached
    • Powered by (3) AA batteries - Not included
    • Meets USCG 2NM 33 CF 183.810 & ABYC A-16
    • Fits ANY Railblaza mounting port - Ordered separately
    • Battery powered - No wires required!

WARNING
This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.
For more information go to www.p65warnings.ca.gov.

Additional Prep/DMV Info

Dealer Engine Prep

Dealer Engine Prep is required to validate the warranty and ensure a working engine. Prep includes completing a full Original Equipment Manufacturer (OEM) checklist, test-run performed in a tank for quality assurance, and re-crating for shipment. Outboards picked up in-store may be stand-alone and no longer in the box or crate.

Pre-Delivery Inspection

Pre-delivery Inspection is required to validate the warranty and includes the necessary services & products used on each new vessel to ensure quality performance prior to delivery.

For rigged vessels: Boat Specialists will install a deep cycle marine battery, rig all steering components, and complete an electrical and systems check. A full system check includes filling the motor with oil, fluids, and fuel, then a test run performed in a tank for quality assurance.

Once everything is tuned and prepared, a sea trial is performed to achieve the ideal RPM-to-top-speed ratio, ensuring the boat gets on plane properly and all systems operate on water. Afterward, full detail is performed on the exterior, deck, and hull to be turn-key ready for the customer.

DMV Registration On Boats and Trailers - For California Residents Only

Boat Specialists will take care of your CA DMV registration including signing a Power of Attorney for each registration. We will mail temporary paperwork with the documents that require the customer's signature. The customer is to sign and return the documents in the envelope provided. Once we have received the paperwork, we will submit all required documents to the DMV to complete registration.

YOU MAY ALSO LIKE…