-
Description
The AB Ventus 10 VL RIB is 10'6" long and 5'7" wide, weighing 123 lbs, with Hypalon tubes, a deep-V fiberglass hull, a capacity of 5 persons or 1,514 lbs, and a maximum motor rating of 25hp Short Shaft.
A lightweight, full-length fiberglass deep-V RIB built for extra space, durability and performance. AB Inflatables created the Ventus to be the perfect lightweight fiberglass performance tender, and thanks to its unique design it needs minimal horsepower without giving up maneuverability. Whether you're cruising back to the marina for lunch or heading out on a fishing trip, the Ventus packs a ton of features into one small, light package.
A deeper freeboard and spacious interior make for an enjoyable, stable and dry ride. The larger sizes seat up to six adults, and the smaller models seat four. Models from 8 to 10 ft come with 820 CSM Orca® coated fabric for extra protection, resistance and durability, and the built-in non-skid deck adds safety and confidence on the water. For extra peace of mind, the Ventus has an additional air chamber built into the hull. It's easy to haul onto a deck or davits, and you can pull it right up on a sandy beach for shore excursions.
AB Inflatables is known worldwide for premium RIBs and tenders built with tough Orca® Hypalon fabric and hand-laid fiberglass or aluminum hulls, made to handle harsh sun, salt water and rough conditions. That's why AB boats are a favorite for everyone from weekend boaters and yacht owners to professional crews.
AB Ventus 10 VL RIB Standard Equipment
-
- Hand Laid Fiberglass Deep "V" Hull
- Stringer System Laminated into Hull
- Non-Skid Rubber Floor Panels
- Plastic External Transom Plate
- Aluminum Internal Transom Plate with Security Lip
- Stainless Steel Bow Eye
- (3) Stainless Steel Davit Lifting Points
- Inner Hull Drain with Plug
- Deck Condensation Plug
- Orca (CSM) Five Layer Coated Fabric
- Raised Single Rub Rail
- 1 Front & 2 Side Handles on Tubes
- 2 Inside Bow Set of 2 Handles on Tubes
- 2 Inside Stern Set of 2 Handles on Tubes
- Additional Air Retaining Chamber Under the Floor
- 3 Layer Reinforced Seams
- Removable Rowing Seat
- Oarlock Bases
- Telescopic Oars with Aluminum Shaft
- Hand Pump
- Maintenance Kit
- Owner's Manual
AB Ventus 10 VL RIB FAQ
How many people does the AB Ventus 10 VL hold?
The AB Ventus 10 VL is rated for 5 persons or 1,514 lbs. Always stay within the capacity plate on the boat.
What size outboard can I use on the AB Ventus 10 VL?
The AB Ventus 10 VL is rated for a maximum of 25hp Short Shaft, and AB recommends 15hp Short Shaft. We sell outboards from Tohatsu, Yamaha, Mercury and Honda and can help you choose one, or call or text (805) 644-6290 about a boat and motor package.
What are the tubes made of?
Hypalon. AB uses tough Orca® coated Hypalon fabric that holds up to sun, heat, salt water and abrasion, so the boat lasts for years.
What kind of hull does it have?
The AB Ventus 10 VL has a rigid deep "V" fiberglass hull for a smooth, dry ride through chop.
How do I store and transport it?
The rigid hull measures about 9'10" x 3'7" x 1'6" with the tubes deflated, and it has lifting points for davits. It also works well on a swim platform, deck or small trailer.
What comes with the AB Ventus 10 VL?
Standard equipment: hand laid fiberglass deep "V" hull, stringer system laminated into hull, non-skid rubber floor panels, plastic external transom plate, aluminum internal transom plate with security lip, stainless steel bow eye, (3) stainless steel davit lifting points, inner hull drain with plug, deck condensation plug, Orca (csm) five layer coated fabric, raised single rub rail, 1 front & 2 side handles on tubes, 2 inside bow set of 2 handles on tubes, 2 inside stern set of 2 handles on tubes, additional air retaining chamber under the floor, 3 layer reinforced seams, removable rowing seat, oarlock bases, telescopic oars with aluminum shaft, hand pump, maintenance kit, and owner's manual.
Do you ship it?
Yes. We ship nationwide. If it's in our current inventory, you can also pick it up at our Ventura or Richmond, CA location. We highly recommend calling or texting (805) 644-6290 before stopping by to make sure it's ready for you.
What warranty does it come with?
It comes with the AB Inflatables 10-year warranty. See our Brand Warranties page for details.
Do you offer financing?
Yes. See our Financing page to learn more and apply online, or call or text (805) 644-6290.
Can you rig and service it?
Yes. Our certified technicians can rig and service your boat and outboard at our Ventura parts and service center. Call or text (805) 644-6290, or book an appointment online.
Why Buy from Boat Specialists
- Family owned and operated since 1976
- Authorized AB Inflatables dealer
- We service what we sell, with certified technicians at our Ventura parts and service center
- We ship nationwide
- Showrooms in Ventura and Richmond, CA. Call or text (805) 644-6290, Monday to Friday, 9am to 5pm PT
-
-
SPECIFICATIONS
AB Ventus 10 VL RIB Specifications
-
- Overall Length: 10'6"
- Overall Width: 5'7"
- Interior Length: 7'7"
- Interior Width: 2'8"
- Weight: 123 lbs
- Capacity: 5 persons or 1,514 lbs
- Max Motor: 25hp Short Shaft
- Rec Motor: 15hp Short Shaft
- Tube Diameter: 17"
- Air Chambers: 3 + 1
- Fabric Type: Hypalon
- Warranty: AB Inflatables 10-Year Warranty
- Hull Dimensions: 9'10" x 3'7" x 1'6"
-
The AB Ventus 10 VL RIB is 10'6" long and 5'7" wide, weighing 123 lbs, with Hypalon tubes, a deep-V fiberglass hull, a capacity of 5 persons or 1,514 lbs, and a maximum motor rating of 25hp Short Shaft.
A lightweight, full-length fiberglass deep-V RIB built for extra space, durability and performance. AB Inflatables created the Ventus to be the perfect lightweight fiberglass performance tender, and thanks to its unique design it needs minimal horsepower without giving up maneuverability. Whether you're cruising back to the marina for lunch or heading out on a fishing trip, the Ventus packs a ton of features into one small, light package.
A deeper freeboard and spacious interior make for an enjoyable, stable and dry ride. The larger sizes seat up to six adults, and the smaller models seat four. Models from 8 to 10 ft come with 820 CSM Orca® coated fabric for extra protection, resistance and durability, and the built-in non-skid deck adds safety and confidence on the water. For extra peace of mind, the Ventus has an additional air chamber built into the hull. It's easy to haul onto a deck or davits, and you can pull it right up on a sandy beach for shore excursions.
AB Inflatables is known worldwide for premium RIBs and tenders built with tough Orca® Hypalon fabric and hand-laid fiberglass or aluminum hulls, made to handle harsh sun, salt water and rough conditions. That's why AB boats are a favorite for everyone from weekend boaters and yacht owners to professional crews.
AB Ventus 10 VL RIB Standard Equipment
-
- Hand Laid Fiberglass Deep "V" Hull
- Stringer System Laminated into Hull
- Non-Skid Rubber Floor Panels
- Plastic External Transom Plate
- Aluminum Internal Transom Plate with Security Lip
- Stainless Steel Bow Eye
- (3) Stainless Steel Davit Lifting Points
- Inner Hull Drain with Plug
- Deck Condensation Plug
- Orca (CSM) Five Layer Coated Fabric
- Raised Single Rub Rail
- 1 Front & 2 Side Handles on Tubes
- 2 Inside Bow Set of 2 Handles on Tubes
- 2 Inside Stern Set of 2 Handles on Tubes
- Additional Air Retaining Chamber Under the Floor
- 3 Layer Reinforced Seams
- Removable Rowing Seat
- Oarlock Bases
- Telescopic Oars with Aluminum Shaft
- Hand Pump
- Maintenance Kit
- Owner's Manual
AB Ventus 10 VL RIB FAQ
How many people does the AB Ventus 10 VL hold?
The AB Ventus 10 VL is rated for 5 persons or 1,514 lbs. Always stay within the capacity plate on the boat.
What size outboard can I use on the AB Ventus 10 VL?
The AB Ventus 10 VL is rated for a maximum of 25hp Short Shaft, and AB recommends 15hp Short Shaft. We sell outboards from Tohatsu, Yamaha, Mercury and Honda and can help you choose one, or call or text (805) 644-6290 about a boat and motor package.
What are the tubes made of?
Hypalon. AB uses tough Orca® coated Hypalon fabric that holds up to sun, heat, salt water and abrasion, so the boat lasts for years.
What kind of hull does it have?
The AB Ventus 10 VL has a rigid deep "V" fiberglass hull for a smooth, dry ride through chop.
How do I store and transport it?
The rigid hull measures about 9'10" x 3'7" x 1'6" with the tubes deflated, and it has lifting points for davits. It also works well on a swim platform, deck or small trailer.
What comes with the AB Ventus 10 VL?
Standard equipment: hand laid fiberglass deep "V" hull, stringer system laminated into hull, non-skid rubber floor panels, plastic external transom plate, aluminum internal transom plate with security lip, stainless steel bow eye, (3) stainless steel davit lifting points, inner hull drain with plug, deck condensation plug, Orca (csm) five layer coated fabric, raised single rub rail, 1 front & 2 side handles on tubes, 2 inside bow set of 2 handles on tubes, 2 inside stern set of 2 handles on tubes, additional air retaining chamber under the floor, 3 layer reinforced seams, removable rowing seat, oarlock bases, telescopic oars with aluminum shaft, hand pump, maintenance kit, and owner's manual.
Do you ship it?
Yes. We ship nationwide. If it's in our current inventory, you can also pick it up at our Ventura or Richmond, CA location. We highly recommend calling or texting (805) 644-6290 before stopping by to make sure it's ready for you.
What warranty does it come with?
It comes with the AB Inflatables 10-year warranty. See our Brand Warranties page for details.
Do you offer financing?
Yes. See our Financing page to learn more and apply online, or call or text (805) 644-6290.
Can you rig and service it?
Yes. Our certified technicians can rig and service your boat and outboard at our Ventura parts and service center. Call or text (805) 644-6290, or book an appointment online.
Why Buy from Boat Specialists
- Family owned and operated since 1976
- Authorized AB Inflatables dealer
- We service what we sell, with certified technicians at our Ventura parts and service center
- We ship nationwide
- Showrooms in Ventura and Richmond, CA. Call or text (805) 644-6290, Monday to Friday, 9am to 5pm PT
AB Ventus 10 VL RIB Specifications
-
- Overall Length: 10'6"
- Overall Width: 5'7"
- Interior Length: 7'7"
- Interior Width: 2'8"
- Weight: 123 lbs
- Capacity: 5 persons or 1,514 lbs
- Max Motor: 25hp Short Shaft
- Rec Motor: 15hp Short Shaft
- Tube Diameter: 17"
- Air Chambers: 3 + 1
- Fabric Type: Hypalon
- Warranty: AB Inflatables 10-Year Warranty
- Hull Dimensions: 9'10" x 3'7" x 1'6"