FINANCING AVAILABLE
-
Description
The Mercury 425CXXL is a 425hp Verado V10 four-stroke outboard with Digital Throttle & Shift (DTS), electric start, power trim and tilt, counter rotation for twin installs, and a 30" ultra long shaft, weighing 723 lbs. Built for large offshore boats and center consoles in single or multi-engine setups. As an authorized Mercury dealer, Boat Specialists sells it new with the full Mercury 3-year factory warranty, after our factory-qualified technicians test-run it.
Mercury's 5.7-liter V10 Verado was the outboard industry's first naturally aspirated V10, delivering extraordinary power with the smooth, quiet, refined running the Verado family is known for. SmartCraft technology and advanced digital controls make it easy to command.
Mercury 425CXXL Key Features
Effortless Control: Digital Throttle & Shift (DTS) controls deliver smooth, quiet shifting and instant throttle response, with zero hesitation. Advanced electro-hydraulic steering enhances the driving experience at all speeds, providing complete control and confident handling wherever the water takes you.
Exceptionally Smooth & Quiet: The rugged, refined Advanced MidSection (AMS) mounting system cradles the powerhead to isolate vibration, while careful tuning dampens induction sounds and nearly eliminates injection noise. So you can enjoy your conversations and cruise with comfort.
Adaptive Speed Control: The Adaptive Speed Control feature lets you maintain engine rpm despite changes in load or conditions. Climbing large swells is easier. Cruising at low speeds is smoother. Carving out tight turns is effortless. You just point the bow toward your destination, and Verado takes it from there.
Precision Gearcase: At high speeds, the hydrodynamic gearcase slips effortless through the water, maximizing efficiency and enhancing stability. At low speeds, its large-diameter Revolution X™ prop powerfully grips the water, giving you confident, authoritative handling around the docks, while providing instant hole shots when it’s time to move.
REQUIRED FEE
$660 Dealer Engine Prep - Our factory-qualified technicians perform a full test run of your new outboard by unpacking it and connecting it to the rigging, fuel, battery, and a diagnostic computer. We run the motor up to operating temperature and test every function to make sure your new motor is working just as it should. The manufacturer's required inspection checklist is completed and submitted to the manufacturer to validate the warranty.
Mercury 425CXXL FAQ
What size boat is the Mercury 425CXXL for?
Built for large offshore boats and center consoles in single or multi-engine setups. Always check your boat's capacity plate for its maximum horsepower and weight.
Do I need a short or long shaft?
Measure your transom from the top edge straight down to the bottom of the hull: about 15" calls for a short shaft, 20" for a long shaft, 25" for an extra-long shaft, and 30" for an ultra-long shaft. The 425CXXL has a 30" ultra long shaft. Not sure? Call or text us at (805) 644-6290 and we'll help you choose.
What comes with the 425CXXL?
Standard features and included items: counter rotation, power trim & tilt, mounting hardware, tool kit, and owner's manual. The propeller is not included.
What do I need to buy separately?
A propeller is sold separately, along with any controls, gauges or rigging your boat needs. We can help you pick the right parts, and our team can rig it for you.
What warranty does it come with?
It's covered by the full Mercury 3-year warranty. See our Brand Warranties page for details, and ask about extended warranties.
Do you offer financing?
Yes. Financing is available on new outboards. See our Financing page to learn more and apply online, or call or text (805) 644-6290.
Can you install and service it?
Yes. We service what we sell. Our certified technicians handle rigging, repowers and routine service at our Ventura parts and service center. Call or text (805) 644-6290, or book an appointment online.
Why Buy from Boat Specialists
- Family owned and operated since 1976
- Authorized Mercury outboard dealer
- We service what we sell, with certified technicians at our Ventura parts and service center
- We ship nationwide
- Showrooms in Ventura and Richmond, CA. Call or text (805) 644-6290, Monday to Friday, 9am to 5pm PT
-
SPECIFICATIONS
Mercury 425CXXL Specifications
-
- Engine Type: Mercury 425CXXL Verado V10 Counter Rotation Four Stroke
- Horsepower: 425hp
- Cylinders: V10
- Shaft Length: 30'' XX-Long
- Steering: Digital Throttle & Shift
- Starter: Smart Start Electric
- Weight: 723 lbs
- Full Throttle Range: 6000-6600
- Displacement: 5.7L
- Fuel Sysem: Electronic Fuel Injection (EFI)
- Induction System: Naturally aspirated, performance-tuned intake manifold
- Warranty: Mercury Marine 3-Year Warranty
Mercury 425CXXL Standard Features
-
- Counter Rotation
- Power Trim & Tilt
- Mounting Hardware
- Tool Kit
- Owner's Manual
*Prop not included. To learn more about choosing the right prop for your motor please view our article Is an Aluminum or Stainless Steel Propeller Right For You?
-
The Mercury 425CXXL is a 425hp Verado V10 four-stroke outboard with Digital Throttle & Shift (DTS), electric start, power trim and tilt, counter rotation for twin installs, and a 30" ultra long shaft, weighing 723 lbs. Built for large offshore boats and center consoles in single or multi-engine setups. As an authorized Mercury dealer, Boat Specialists sells it new with the full Mercury 3-year factory warranty, after our factory-qualified technicians test-run it.
Mercury's 5.7-liter V10 Verado was the outboard industry's first naturally aspirated V10, delivering extraordinary power with the smooth, quiet, refined running the Verado family is known for. SmartCraft technology and advanced digital controls make it easy to command.
Mercury 425CXXL Key Features
Effortless Control: Digital Throttle & Shift (DTS) controls deliver smooth, quiet shifting and instant throttle response, with zero hesitation. Advanced electro-hydraulic steering enhances the driving experience at all speeds, providing complete control and confident handling wherever the water takes you.
Exceptionally Smooth & Quiet: The rugged, refined Advanced MidSection (AMS) mounting system cradles the powerhead to isolate vibration, while careful tuning dampens induction sounds and nearly eliminates injection noise. So you can enjoy your conversations and cruise with comfort.
Adaptive Speed Control: The Adaptive Speed Control feature lets you maintain engine rpm despite changes in load or conditions. Climbing large swells is easier. Cruising at low speeds is smoother. Carving out tight turns is effortless. You just point the bow toward your destination, and Verado takes it from there.
Precision Gearcase: At high speeds, the hydrodynamic gearcase slips effortless through the water, maximizing efficiency and enhancing stability. At low speeds, its large-diameter Revolution X™ prop powerfully grips the water, giving you confident, authoritative handling around the docks, while providing instant hole shots when it’s time to move.
REQUIRED FEE
$660 Dealer Engine Prep - Our factory-qualified technicians perform a full test run of your new outboard by unpacking it and connecting it to the rigging, fuel, battery, and a diagnostic computer. We run the motor up to operating temperature and test every function to make sure your new motor is working just as it should. The manufacturer's required inspection checklist is completed and submitted to the manufacturer to validate the warranty.
Mercury 425CXXL FAQ
What size boat is the Mercury 425CXXL for?
Built for large offshore boats and center consoles in single or multi-engine setups. Always check your boat's capacity plate for its maximum horsepower and weight.
Do I need a short or long shaft?
Measure your transom from the top edge straight down to the bottom of the hull: about 15" calls for a short shaft, 20" for a long shaft, 25" for an extra-long shaft, and 30" for an ultra-long shaft. The 425CXXL has a 30" ultra long shaft. Not sure? Call or text us at (805) 644-6290 and we'll help you choose.
What comes with the 425CXXL?
Standard features and included items: counter rotation, power trim & tilt, mounting hardware, tool kit, and owner's manual. The propeller is not included.
What do I need to buy separately?
A propeller is sold separately, along with any controls, gauges or rigging your boat needs. We can help you pick the right parts, and our team can rig it for you.
What warranty does it come with?
It's covered by the full Mercury 3-year warranty. See our Brand Warranties page for details, and ask about extended warranties.
Do you offer financing?
Yes. Financing is available on new outboards. See our Financing page to learn more and apply online, or call or text (805) 644-6290.
Can you install and service it?
Yes. We service what we sell. Our certified technicians handle rigging, repowers and routine service at our Ventura parts and service center. Call or text (805) 644-6290, or book an appointment online.
Why Buy from Boat Specialists
- Family owned and operated since 1976
- Authorized Mercury outboard dealer
- We service what we sell, with certified technicians at our Ventura parts and service center
- We ship nationwide
- Showrooms in Ventura and Richmond, CA. Call or text (805) 644-6290, Monday to Friday, 9am to 5pm PT
Mercury 425CXXL Specifications
-
- Engine Type: Mercury 425CXXL Verado V10 Counter Rotation Four Stroke
- Horsepower: 425hp
- Cylinders: V10
- Shaft Length: 30'' XX-Long
- Steering: Digital Throttle & Shift
- Starter: Smart Start Electric
- Weight: 723 lbs
- Full Throttle Range: 6000-6600
- Displacement: 5.7L
- Fuel Sysem: Electronic Fuel Injection (EFI)
- Induction System: Naturally aspirated, performance-tuned intake manifold
- Warranty: Mercury Marine 3-Year Warranty
Mercury 425CXXL Standard Features
-
- Counter Rotation
- Power Trim & Tilt
- Mounting Hardware
- Tool Kit
- Owner's Manual
*Prop not included. To learn more about choosing the right prop for your motor please view our article Is an Aluminum or Stainless Steel Propeller Right For You?
