Polyform Boat Fender HTM-2 | 8.5 x 20.5 | White

Polyform Boat Fender HTM-2 | 8.5 x 20.5 | White

SKU#
20953038
$63.99
$63.35
(You save $0.64 )
Brand:
Polyform
Size:
8.5"x 20.5"
Material:
Vinyl
Color:
White
Subtotal:
$63.99
$63.35
(You save $0.64 )
Available Options
Adding to cart… The item has been added
Rates are for quote purposes only and may not reflect actual shipping costs. Real-time rates will be provided at check-out. For shipping outside the US or a personalized quote, please call 805-644-6290. Shipping Terms
  • Description

    In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high-quality fender has to offer. The HTM-2 fender is designed to provide protection and stand-off for larger vessels 20' to 30' feet in length.

    • A hole through middle style boat fender made by Polyform and manufactured in the USA
    • HTM-2 are 8.5 in. diameter by 20.5 in. tall with a center tube diameter of 5/8 in.
    • A versatile fender built with reinforced tube ends and molded ribbing for greater durability
    • HTM-2 fenders are recommended for boats between 20 and 30 ft. in length
    • This fender ships as a single unit, pre-inflated, and has a Polyform inflation valve to adjust pressure

    WARNING
    This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.
    For more information go to www.p65warnings.ca.gov.

In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high-quality fender has to offer. The HTM-2 fender is designed to provide protection and stand-off for larger vessels 20' to 30' feet in length.

  • A hole through middle style boat fender made by Polyform and manufactured in the USA
  • HTM-2 are 8.5 in. diameter by 20.5 in. tall with a center tube diameter of 5/8 in.
  • A versatile fender built with reinforced tube ends and molded ribbing for greater durability
  • HTM-2 fenders are recommended for boats between 20 and 30 ft. in length
  • This fender ships as a single unit, pre-inflated, and has a Polyform inflation valve to adjust pressure

WARNING
This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.
For more information go to www.p65warnings.ca.gov.

Additional Prep/DMV Info

Dealer Engine Prep

Dealer Engine Prep is required to validate the warranty and ensure a working engine. Prep includes completing a full Original Equipment Manufacturer (OEM) checklist, test-run performed in a tank for quality assurance, and re-crating for shipment. Outboards picked up in-store may be stand-alone and no longer in the box or crate.

Pre-Delivery Inspection

Pre-delivery Inspection is required to validate the warranty and includes the necessary services & products used on each new vessel to ensure quality performance prior to delivery.

For rigged vessels: Boat Specialists will install a deep cycle marine battery, rig all steering components, and complete an electrical and systems check. A full system check includes filling the motor with oil, fluids, and fuel, then a test run performed in a tank for quality assurance.

Once everything is tuned and prepared, a sea trial is performed to achieve the ideal RPM-to-top-speed ratio, ensuring the boat gets on plane properly and all systems operate on water. Afterward, full detail is performed on the exterior, deck, and hull to be turn-key ready for the customer.

DMV Registration On Boats and Trailers - For California Residents Only

Boat Specialists will take care of your CA DMV registration including signing a Power of Attorney for each registration. We will mail temporary paperwork with the documents that require the customer's signature. The customer is to sign and return the documents in the envelope provided. Once we have received the paperwork, we will submit all required documents to the DMV to complete registration.

YOU MAY ALSO LIKE…