FINANCING AVAILABLE
-
Description
The Tohatsu BFT250DK1XDA is a 250hp four-stroke outboard with drive-by-wire controls, electric start, power trim and tilt, and a 25" extra long shaft, weighing 644 lbs. Built for larger center consoles, offshore boats and twin-engine setups. As an authorized Tohatsu dealer, Boat Specialists sells it new with the full Tohatsu 5-year warranty, and our factory-qualified technicians test-run every new motor before delivery.
The 250hp has a large-displacement 3.6 liter narrow V6 for top performance, durability and fuel economy, plus a high-output 90 amp alternator (60 charging amps). It's Tohatsu's most powerful four-stroke outboard. A redesigned exterior improves corrosion resistance and protection against water intrusion. The latest DK1 version also reintroduces the O2 sensor with a revised cooling water path for better reliability, and makes routine maintenance easier with a new dipstick handle, oil filter flange and two-piece mid cover.
Tohatsu BFT250DK1XDA Key Features
-
- High-output 90 amp alternator with 60 charging amps
- Large-displacement 3.6 liter V6
- Double-sealed, multi-layered paint process to help protect against corrosion
- Semi-direct air intake system
- Enhanced sealing system with three new large locks
REQUIRED FEE
$560 Dealer Engine Prep - Our factory-qualified technicians perform a full test run of your new outboard by unpacking it and connecting it to the rigging, fuel, battery, and a diagnostic computer. We run the motor up to operating temperature and test every function to make sure your new motor is working just as it should. The manufacturer's required inspection checklist is completed and submitted to the manufacturer to validate the warranty.
Tohatsu BFT250DK1XDA FAQ
What size boat is the Tohatsu BFT250DK1XDA for?
Built for larger center consoles, offshore boats and twin-engine setups. Always check your boat's capacity plate for its maximum horsepower and weight.
Do I need a short or long shaft?
Measure your transom from the top edge straight down to the bottom of the hull: about 15" calls for a short shaft, 20" for a long shaft, and 25" for an extra-long shaft, and 30" for an ultra-long shaft. The BFT250DK1XDA has a 25" extra long shaft. Not sure? Call or text us at (805) 644-6290 and we'll help you choose.
What comes with the BFT250DK1XDA?
Standard features and included items: power trim & tilt, 12 volt charging system, stop switch lanyard, and owner's manual. The propeller is not included.
What do I need to buy separately?
A propeller is sold separately. We can help you pick the right parts, and our team can rig it for you.
What warranty does it come with?
It's covered by the Tohatsu 5-year warranty. See our Brand Warranties page for details, and ask about extended warranties.
Do you offer financing?
Yes. Financing is available on new outboards. See our Financing page to learn more and apply online, or call or text (805) 644-6290.
Can you install and service it?
Yes. We service what we sell. Our certified technicians handle rigging, repowers and routine service at our Ventura parts and service center. Call or text (805) 644-6290, or book an appointment online.
Why Buy from Boat Specialists
- Family owned and operated since 1976
- Authorized Tohatsu outboard dealer
- We service what we sell, with certified technicians at our Ventura parts and service center
- Factory-qualified dealer prep: every new motor is test-run before delivery
- Showrooms in Ventura and Richmond, CA. Call or text (805) 644-6290, Monday to Friday, 9am to 5pm PT
-
-
SPECIFICATIONS
Tohatsu BFT250DK1XDA Specifications
-
- Engine Type: Tohatsu BFT250DK1XDA Drive-By-Wire (DBW) Four-Stroke
- Horsepower: 250hp
- Cylinders: 6 cyl
- Shaft Length: 25" X-Long
- Steering: Drive by Wire
- Starter: Electric
- Weight: 644 lbs
- Full Throttle Range: 5300 - 6300 rpm
- Displacement: 3583cc
- Induction System: EFI
- Warranty: Tohatsu 5-Year Warranty
Tohatsu BFT250DK1XDA Standard Features
-
- Power Trim & Tilt
- 12 Volt Charging System
- Stop Switch Lanyard
- Owner's Manual
*Prop not included.
-
The Tohatsu BFT250DK1XDA is a 250hp four-stroke outboard with drive-by-wire controls, electric start, power trim and tilt, and a 25" extra long shaft, weighing 644 lbs. Built for larger center consoles, offshore boats and twin-engine setups. As an authorized Tohatsu dealer, Boat Specialists sells it new with the full Tohatsu 5-year warranty, and our factory-qualified technicians test-run every new motor before delivery.
The 250hp has a large-displacement 3.6 liter narrow V6 for top performance, durability and fuel economy, plus a high-output 90 amp alternator (60 charging amps). It's Tohatsu's most powerful four-stroke outboard. A redesigned exterior improves corrosion resistance and protection against water intrusion. The latest DK1 version also reintroduces the O2 sensor with a revised cooling water path for better reliability, and makes routine maintenance easier with a new dipstick handle, oil filter flange and two-piece mid cover.
Tohatsu BFT250DK1XDA Key Features
-
- High-output 90 amp alternator with 60 charging amps
- Large-displacement 3.6 liter V6
- Double-sealed, multi-layered paint process to help protect against corrosion
- Semi-direct air intake system
- Enhanced sealing system with three new large locks
REQUIRED FEE
$560 Dealer Engine Prep - Our factory-qualified technicians perform a full test run of your new outboard by unpacking it and connecting it to the rigging, fuel, battery, and a diagnostic computer. We run the motor up to operating temperature and test every function to make sure your new motor is working just as it should. The manufacturer's required inspection checklist is completed and submitted to the manufacturer to validate the warranty.
Tohatsu BFT250DK1XDA FAQ
What size boat is the Tohatsu BFT250DK1XDA for?
Built for larger center consoles, offshore boats and twin-engine setups. Always check your boat's capacity plate for its maximum horsepower and weight.
Do I need a short or long shaft?
Measure your transom from the top edge straight down to the bottom of the hull: about 15" calls for a short shaft, 20" for a long shaft, and 25" for an extra-long shaft, and 30" for an ultra-long shaft. The BFT250DK1XDA has a 25" extra long shaft. Not sure? Call or text us at (805) 644-6290 and we'll help you choose.
What comes with the BFT250DK1XDA?
Standard features and included items: power trim & tilt, 12 volt charging system, stop switch lanyard, and owner's manual. The propeller is not included.
What do I need to buy separately?
A propeller is sold separately. We can help you pick the right parts, and our team can rig it for you.
What warranty does it come with?
It's covered by the Tohatsu 5-year warranty. See our Brand Warranties page for details, and ask about extended warranties.
Do you offer financing?
Yes. Financing is available on new outboards. See our Financing page to learn more and apply online, or call or text (805) 644-6290.
Can you install and service it?
Yes. We service what we sell. Our certified technicians handle rigging, repowers and routine service at our Ventura parts and service center. Call or text (805) 644-6290, or book an appointment online.
Why Buy from Boat Specialists
- Family owned and operated since 1976
- Authorized Tohatsu outboard dealer
- We service what we sell, with certified technicians at our Ventura parts and service center
- Factory-qualified dealer prep: every new motor is test-run before delivery
- Showrooms in Ventura and Richmond, CA. Call or text (805) 644-6290, Monday to Friday, 9am to 5pm PT
Tohatsu BFT250DK1XDA Specifications
-
- Engine Type: Tohatsu BFT250DK1XDA Drive-By-Wire (DBW) Four-Stroke
- Horsepower: 250hp
- Cylinders: 6 cyl
- Shaft Length: 25" X-Long
- Steering: Drive by Wire
- Starter: Electric
- Weight: 644 lbs
- Full Throttle Range: 5300 - 6300 rpm
- Displacement: 3583cc
- Induction System: EFI
- Warranty: Tohatsu 5-Year Warranty
Tohatsu BFT250DK1XDA Standard Features
-
- Power Trim & Tilt
- 12 Volt Charging System
- Stop Switch Lanyard
- Owner's Manual
*Prop not included.
